As he drives down the turnpike and approaches the tollbooth, he pushes the switch to roll down the window and nothing happens. The switch moves but the window does not adjust. There is not even a noise from the window motor, which suggests that the device is not working. He must stop his car and open the door to pay the attendant before continuing on his journey. Thoughts of an expensive auto repair bill dance through his head, putting him in a bad mood and dimming the anticipated fun of his weekend getaway. He doesn’t despair – you can repair the power window yourself and save a lot of money on expensive dealer fees. Let’s take a look at the steps you can take to fix the problem yourself and save a lot of money in the process.
Before assuming that the window regulator must be replaced, you must first rule out the possibility of dirty electrical contacts. In most cars, the main power for all switches goes through the main switch located on the driver’s console. Sometimes the switch is dirty and the window doesn’t work properly. If this is the case, take the necessary steps to clean the contact and your problem should be resolved.
If you determine that the contacts are clean and your switch is working, then the motor has probably burned out and needs to be replaced. Whether you are installing a window regulator honda gold has volkswagen window regulatoror a regulator for any other brand, the steps to replace a window regulator are usually quite similar:
1. Remove the door panel from the affected window.
2. Locate and remove the bolts that hold the regulator to the door; you may have to manually roll down the window to access the latches.
3. Remove the old regulator, disconnect all wiring, and replace the old regulator with a new one purchased from a parts supplier. Shop online for the best value, as you’ll pay a pretty penny if you order one through a dealer.
4. Tighten the bolts holding the new regulator and reinstall the moisture barrier. Be sure to re-route all cables to the door before closing the door panel.
5. Activate the power window switch and the new regulator should work without hindrance.
Of course, follow your car’s repair manual for specific instructions.
I’ve given you a general outline to convince you that this is a task that even a novice mechanic can handle, in other words: you can do it! By handling the problem yourself, you will save a lot of money by avoiding shops that will dial in the replacement part and add several hours of labor costs to your bill. Shop online to compare prices and receive the best shipping and handling arrangements available.