Do you have a fascination with pyramids? Have you ever wondered what they are for? Well, you are not alone! People have long speculated that these tremendous structures were more than just places to enshrine their nobility after their death. If the pyramids produce an invisible power, as some people claim, is it possible to harness that power? Read on and find out how you can build a pyramid of any size and test it out to see if it will also generate its own pyramid power.
How is a pyramid tested? By putting objects inside and observing how these objects are influenced by the pyramid. At least that’s what people have done in the past. Razor blades become sharper and stay sharp much longer; the fruit dries but does not rot or mold; plants grow faster and much fuller; milk turns into yogurt if left in long enough. These are all claims made by pyramid researchers.
what will you need
1. 4 pieces of cardboard that are large enough to create the size pyramid you want.
2. Type.
3. A directional compass with a flat base.
exposing it
The pyramid of Giza was built according to amazingly exact dimensions. For your experiments to work, you’ll need to duplicate these dimensions as physically as possible.
You are going to make 4 cardboard triangles and they should all be exactly the same size.
Lay one of the cardboard pieces down and measure the length of the bottom side. Now, multiply that length by 0.951. The result will be the length of the other sides of the triangle.
For example, if the length of the bottom edge of the cardboard is 10 inches, the length of each of the other sides of the triangle would be 9.51 inches. Set a drawing compass with a width of 9.51 inches and use it to make intersecting arcs on the base. The point where the arcs intersect will be the top of the triangle. Draw lines from this point down to each end of the base and one side of your pyramid is complete.
Create 3 more sides in the same way and cut out the triangles from the cardboard.
So that there is no confusion as to which is the bottom edge, mark the longest (bottom) edge before cutting it, to show that it belongs to the base.
Putting it all together
Lay a flat piece with the mark on the bottom. Lay another piece next to it with its side touching the first, also with the mark on the bottom. Line these pieces up carefully so that each edge matches the other, and then tape them together.
Line up the remaining two pieces the same way and glue them in place.
Now that you have all 4 sides connected, you can fold the pieces along each of the taped edges and bring your pyramid to life when the end edges are taped.
That’s it for the build, but you have to do one more thing to “activate” your pyramid.
Aligning your pyramid
Just as the Great Pyramid of Giza was aligned with amazing precision to face true north, you must do the same. It works like a radio antenna, so the more accurately you orient your pyramid, the higher its energy.
To do this, you need a compass with a straight base plate. You also need to know the declination angle for your particular area.
A compass points to magnetic north. This can vary by many degrees from true north, depending on your location. Your declination angle helps you convert magnetic north to true north and can be easily found by doing a web search for “find my declination angle”.
If your declination angle is a negative number, you must turn the compass clockwise that many degrees to find true north. If the angle is positive, turn the compass counterclockwise to compensate.
One more thing: when they give you your declination angle, they usually give you minutes as well as degrees. To convert these minutes to parts of degrees, divide the minutes by 60. For example: If your declination is 17 degrees, 26 minutes, divide 26 by 60 and you get .43. This would make your total declination 17.43 degrees. You would then set your compass dial counterclockwise by 17.43 degrees and this would point you directly to true north.
Place the adjusted compass on a flat surface, away from large objects and electrical appliances that may interfere with the magnetic field, and point it toward true north. Lay the pyramid on its side with one edge aligned parallel with the base plate. This is the direction the pyramid should stay in for maximum energy.
Testing the power of your pyramid
Each pyramid has a “sweet spot” and this is directly in the center about a third of the way from the bottom to the top. In the Great Pyramid, this is where the king’s chamber was hidden. Keep this in mind when you put something inside. Also, if you are going to sharpen your knives, it helps to orient the edge of the knife in a north/south direction.
There is definitely something deep in the pyramids. Take the time to build one and have fun discovering what kind of pyramid power you can generate in your own home. Perhaps you can be one of those who add another piece to the puzzle of the mysteries of the pyramids.