Tub Refinishing, also known as Tub Reglazing, is a process of applying a polyurethane coating to enhance or renew the appearance of your accessory. The finish of the tub is somewhat similar to the finish of a vehicle and should be cared for in the same way to extend the life of the finish.
There are a number of things that must be done to make the glazed finish last. If you don’t follow these basic care steps, the life of your finish can be drastically shortened and possibly void any warranties you have been given.
Here are the steps you need to take to care for your refinished bathtub / glass tub:
- Do not use the surface for the number of days or hours specified by the company.
- Do not put soap, sponges, cloths, bottles, or anything else on the finish at any time! Instead, use a shower rack.
- Don’t let leaky faucets go unrepaired!
- Don’t use abrasive cleaners. No SOS pads. Do not commit. No razors. NO ABRASIVES! The tub will clean easily with spray cleaners and a soft sponge.
- Do not use bath mats with suction cups underneath. They can pull on the finish and trap moisture.
- Do not dust the surface with your finger. Dust on the surface is likely to dissipate in 3-4 weeks with normal cleaning and use. Waxing also helps.
- Do not use the bathtub or other glass surface to clean brushes or any chemicals or materials related to paint. Keep harsh chemicals away from the bathtub. Do not clean or store sharp or abrasive items on the surface.
- Do not allow workers to stand in a glass tub with their shoes on. Ask them to remove their shoes and put on a soft towel.
- Do not place or store any items in a tub or finished surface that could damage or cut the surface.
- Make sure the room is well ventilated and read all manufacturer’s precautions and instructions. ALWAYS use your common sense, be safe and smart.
- Make sure there are no holes or gaps in the grout or caulk in your shower. This can lead to wall damage and a costly repair bill.
- Use Tilex – Lysol Tile Cleaner – Mr. Clean – Fantastic. NO POWDER, NO ABRASIVES, just a soft sponge.
- Keep the bathtub clean and wipe it with a towel after each use. You don’t have to wipe it dry.
- Keep the sealant around the tub.
- WAX your regulated tub two weeks after it’s ready, and then once every 1-3 months thereafter. Use normal car wax and DO NOT HIGHLY POLISH. Start by thoroughly cleaning the surface and then gently pat dry. Then apply a thin, light layer of wax with a damp cloth in light circular motions. Wipe off excess wax with a soft, dry cotton towel.
With these instructions in mind, you can be sure that you are taking proper care of your newly refinished tub or tile and avoiding the costly mistake of voiding any warranties you have been given.